#1 18. März 2011 So langsam verzweifle ich. Ich will mich ins WLAN Wlan meiner Universitaet einloggen. Mit Ubuntu, Debian, Windows 7 und Android fuktioniert es ohne Probleme. Auch B4RC2 laeuft mit WPA2. Es kommen folgende Fehlermeldungen: PEAP-MASCHAPv2 (WLAN) Connection Failed: Bad password Unsecured (WLAN) Connection Failed: Unable to Get IP Address WICD Version: 1.70 Wlan Adapter: Intel WiFI 5100 AGN Fehlermeldung beim Start von WICD: Could not connect to wicd's D-Bus interface. Check the wicd log for error messages. wicd.log Code: 2011/03/18 13:02:00 :: --------------------------- 2011/03/18 13:02:00 :: wicd initializing... 2011/03/18 13:02:00 :: --------------------------- 2011/03/18 13:02:00 :: wicd is version 1.7.0 552 2011/03/18 13:02:00 :: setting backend to external 2011/03/18 13:02:00 :: trying to load backend external 2011/03/18 13:02:00 :: successfully loaded backend external 2011/03/18 13:02:00 :: trying to load backend external 2011/03/18 13:02:00 :: successfully loaded backend external 2011/03/18 13:02:00 :: Automatically detected wireless interface wlan0 2011/03/18 13:02:00 :: setting wireless interface wlan0 2011/03/18 13:02:00 :: automatically detected wired interface eth0 2011/03/18 13:02:00 :: setting wired interface eth0 2011/03/18 13:02:00 :: setting wpa driver wext 2011/03/18 13:02:00 :: setting use global dns to False 2011/03/18 13:02:00 :: setting global dns 2011/03/18 13:02:00 :: global dns servers are None None None 2011/03/18 13:02:00 :: domain is None 2011/03/18 13:02:00 :: search domain is None 2011/03/18 13:02:00 :: setting automatically reconnect when connection drops True 2011/03/18 13:02:00 :: Setting dhcp client to 0 2011/03/18 13:02:00 :: Wireless configuration file found... 2011/03/18 13:02:00 :: Wired configuration file found... 2011/03/18 13:02:00 :: chmoding configuration files 0600... 2011/03/18 13:02:00 :: chowning configuration files root:root... 2011/03/18 13:02:00 :: Using wireless interface...wlan0 2011/03/18 13:02:00 :: Using wired interface...eth0 2011/03/18 13:02:06 :: Autoconnecting... 2011/03/18 13:02:08 :: No wired connection present, attempting to autoconnect to wireless network 2011/03/18 13:02:11 :: Unable to autoconnect, you'll have to manually connect 2011/03/18 13:02:11 :: Autoconnecting... 2011/03/18 13:02:11 :: No wired connection present, attempting to autoconnect to wireless network 2011/03/18 13:02:15 :: Unable to autoconnect, you'll have to manually connect 2011/03/18 13:02:17 :: Autoconnecting... 2011/03/18 13:02:17 :: No wired connection present, attempting to autoconnect to wireless network 2011/03/18 13:02:20 :: Unable to autoconnect, you'll have to manually connect 2011/03/18 13:02:22 :: Autoconnecting... 2011/03/18 13:02:22 :: No wired connection present, attempting to autoconnect to wireless network 2011/03/18 13:02:25 :: Unable to autoconnect, you'll have to manually connect 2011/03/18 13:02:40 :: trying to load backend external 2011/03/18 13:02:40 :: trying to load backend ioctl 2011/03/18 13:02:40 :: WARNING: python-iwscan not found, falling back to using iwlist scan. 2011/03/18 13:02:40 :: WARNING: python-wpactrl not found, falling back to using wpa_cli. 2011/03/18 13:03:12 :: setting use global dns to 0 2011/03/18 13:03:12 :: setting global dns 2011/03/18 13:03:12 :: global dns servers are 2011/03/18 13:03:12 :: domain is 2011/03/18 13:03:12 :: search domain is 2011/03/18 13:03:12 :: setting wireless interface wlan0 2011/03/18 13:03:12 :: setting wired interface eth0 2011/03/18 13:03:12 :: setting wpa driver wext 2011/03/18 13:03:12 :: setting automatically reconnect when connection drops 1 2011/03/18 13:03:12 :: setting backend to external 2011/03/18 13:03:12 :: Setting dhcp client to 0 2011/03/18 13:03:14 :: Connecting to wireless network DHBW-KA 2011/03/18 13:03:14 :: attempting to set hostname with dhclient 2011/03/18 13:03:14 :: using dhcpcd or another supported client may work better 2011/03/18 13:03:15 :: attempting to set hostname with dhclient 2011/03/18 13:03:15 :: using dhcpcd or another supported client may work better 2011/03/18 13:03:15 :: Putting interface down 2011/03/18 13:03:15 :: Releasing DHCP leases... 2011/03/18 13:03:15 :: attempting to set hostname with dhclient 2011/03/18 13:03:15 :: using dhcpcd or another supported client may work better 2011/03/18 13:03:15 :: Setting false IP... 2011/03/18 13:03:15 :: Stopping wpa_supplicant 2011/03/18 13:03:15 :: Flushing the routing table... 2011/03/18 13:03:15 :: Putting interface up... 2011/03/18 13:03:17 :: Attempting to authenticate... 2011/03/18 13:03:17 :: Ignoring template line: ' ca_cert="$_CA_CERT" 2011/03/18 13:03:17 :: ' 2011/03/18 13:03:53 :: wpa_supplicant authentication may have failed. 2011/03/18 13:03:53 :: connect result is Failed 2011/03/18 13:03:53 :: exiting connection thread 2011/03/18 13:03:53 :: Sending connection attempt result bad_pass 2011/03/18 13:03:53 :: attempting to set hostname with dhclient 2011/03/18 13:03:53 :: using dhcpcd or another supported client may work better 2011/03/18 13:03:53 :: attempting to set hostname with dhclient 2011/03/18 13:03:53 :: using dhcpcd or another supported client may work better 2011/03/18 13:04:15 :: Connecting to wireless network DHBW-KA-UNENCRYPTED 2011/03/18 13:04:15 :: attempting to set hostname with dhclient 2011/03/18 13:04:15 :: using dhcpcd or another supported client may work better 2011/03/18 13:04:15 :: attempting to set hostname with dhclient 2011/03/18 13:04:15 :: using dhcpcd or another supported client may work better 2011/03/18 13:04:15 :: Putting interface down 2011/03/18 13:04:15 :: Releasing DHCP leases... 2011/03/18 13:04:15 :: attempting to set hostname with dhclient 2011/03/18 13:04:15 :: using dhcpcd or another supported client may work better 2011/03/18 13:04:15 :: Setting false IP... 2011/03/18 13:04:15 :: Stopping wpa_supplicant 2011/03/18 13:04:15 :: Flushing the routing table... 2011/03/18 13:04:15 :: Putting interface up... 2011/03/18 13:04:17 :: Running DHCP with hostname bt 2011/03/18 13:04:17 :: attempting to set hostname with dhclient 2011/03/18 13:04:17 :: using dhcpcd or another supported client may work better 2011/03/18 13:04:17 :: Internet Systems Consortium DHCP Client V3.1.1 2011/03/18 13:04:17 :: Copyright 2004-2008 Internet Systems Consortium. 2011/03/18 13:04:17 :: All rights reserved. 2011/03/18 13:04:17 :: For info, please visit http://www.isc.org/sw/dhcp/ 2011/03/18 13:04:17 :: 2011/03/18 13:04:18 :: Listening on LPF/wlan0/00:16:ea:c5:ac:1a 2011/03/18 13:04:18 :: Sending on LPF/wlan0/00:16:ea:c5:ac:1a 2011/03/18 13:04:18 :: Sending on Socket/fallback 2011/03/18 13:04:20 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 2011/03/18 13:04:26 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13 2011/03/18 13:04:39 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15 2011/03/18 13:04:54 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 2011/03/18 13:05:02 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19 2011/03/18 13:05:21 :: No DHCPOFFERS received. 2011/03/18 13:05:21 :: No working leases in persistent database - sleeping. 2011/03/18 13:05:21 :: DHCP connection failed 2011/03/18 13:05:21 :: exiting connection thread 2011/03/18 13:05:21 :: Sending connection attempt result dhcp_failed 2011/03/18 13:05:21 :: attempting to set hostname with dhclient 2011/03/18 13:05:21 :: using dhcpcd or another supported client may work better 2011/03/18 13:05:21 :: attempting to set hostname with dhclient 2011/03/18 13:05:21 :: using dhcpcd or another supported client may work better + Multi-Zitat Zitieren
#2 18. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Wlan Modul wurde richtig erkannt ja? + Multi-Zitat Zitieren
#3 18. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Danke fuer die schnelle Antwort. Ja, ich kann mich in alle anderen Wlan-Netze einloggen. (Daheim - WPA2, Android HotSpot - WPA) lspci Code: 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection lshw Code: *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:16:ea:c5:ac:1a width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet phy sical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35. 8 firmware=8.24.2.12 ip=192.168.178.23 latency=0 link=yes module=iwlagn multicas t=yes wireless=IEEE 802.11abgn Template PEAP with TKIP/MSCHAPV2 (wobei ich schon selbst erstellte probiert habe) Code: name = PEAP with TKIP/MSCHAPV2 author = Fralaltro version = 1 require identity *Identity password *Password optional ca_cert *Path_to_CA_Cert ----- ctrl_interface=/var/run/wpa_supplicant network={ ssid="$_ESSID" scan_ssid=$_SCAN proto=WPA key_mgmt=WPA-EAP pairwise=TKIP group=TKIP eap=PEAP identity="$_IDENTITY" password="$_PASSWORD" ca_cert="$_CA_CERT" phase1="peaplabel=0" phase2="auth=MSCHAPV2" } + Multi-Zitat Zitieren
#4 18. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Hmm... da kann ich dir auch nicht weiterhelfen, dass ist etwas Tricky bei Backtrack, hatte bei BT2 auch (als ich es mal angetestet hatte) probleme mit dem Wlan. Du kannst es mal bei Suse Linux - Debian - Ubuntu - Wiki: Linux-Forum.de versuchen, da könnten sie dir eher helfen als hier (nichts RR aber, dass Forum ist nicht auf Linux spezialisiert). + Multi-Zitat Zitieren
#5 19. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Trozdem Danke Ich werde dort nochmal posten. Falls noch jemand eine Idee hat immer her damit. Falls ich dort eine Loesung finde, dann werde ich es hier posten. + Multi-Zitat Zitieren
#6 21. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) 2011/03/18 13:03:53 :: wpa_supplicant authentication may have failed. also stimmt da was mit dem encryption nicht, würde ich jetzt denken. oder evtl. ein treiberproblem. good luck! + Multi-Zitat Zitieren
#7 21. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Danke. Ich gucke mal ob ich da was bearbeiten kann, damit es laeuft. + Multi-Zitat Zitieren
#8 22. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) Also ich hab Backtrack nicht lange benutzt aber es ist wahrscheinlich ein Treiberproblem, die Tatsache das Backtrack auf Debian aufsetzt bekräftigt nur meine Vermutung, da die Wlan-Geräteerkennung von Debian...naja für die katz ist! Wollte gestern erst nen Thema dafür öffnen weil ich Debian jetzt Zuhause als DesktopOS nutze und schon zwei Tage krankhaft versucht habe mein wlan zum laufen zu bekommen. An sich lief es ja angeblich es hat sogar zwei von bestimmt 8 wlannetzen in der Umgebung gefunden, aber alle anderen nicht und ich wusste auch nicht wieso nur diese. Es hat sich halt herausgestellt das er dem gerät die falschen Treiber zugewiesen hat mit ähnlichem Chipsatz, da ich sie auch leider nicht direkt "abschalten" konnte weil er sie bei jedem start erneut geladen habe (blacklist lief auch nicht ganz) hab ich einfach mal ALLE treiber die diesen namen oder ähnlichen hatten entfernt . Ich weiß keine schlaue vorzuschlagende Lösung, aber jetzt konnte ich meinen eigenen aufspielen und es läuft echt wie geschmiert :] Vollständigkeitshalber: wlanstick mit Ralink Chipsatz (rt2870sta) So zu weit ausgeholt, ich empfehle einfach mal diese Treiber die er dir vorgibt zu deaktivieren und herstellerspezifische zu laden (wenn es denn welche gibt) mfg gater001 + Multi-Zitat Zitieren
#9 27. März 2011 AW: [Backtrack 4 RC2] WICD - WLAN kann nicht verbunden werden (PEAP-MASCHAPv2) habe ich auch schon versucht. ich werde naechste woche das mal mit einem anderen rechner ausprobieren. + Multi-Zitat Zitieren