#1 10. Juli 2011 Hallo möchte gerne rtorrent installieren und habe vorher einige fragen über die Vorgehensweise habe mir zwar The libTorrent and rTorrent Project und rutorrent - Yet another web front-end for rTorrent - Google Project Hosting durchgelesen, nur wollte ich nochmal nachfragen um sicher zu sein über abpt-get install rtorrent werden rtorrent und libtorrent installiert (die benötigt wird ) danach ein user anlegen zb rtorrent adduser rtorrent -shell /bin/false -home die rtorrent.rc von /usr/share/doc/rtorrent/examples/rtorrent.rc nach /home/hanskanns/ kopieren dann bearbeiten ist es sowei ok? LG + Multi-Zitat Zitieren
#2 10. Juli 2011 AW: rtorrent installation fragen Dein Vorgehen ist prinzipiell richtig. Folgendes beachten: Zieldatei sollte ~/.rtorrent.rc sein (Also den Punkt nicht vergessen). Siehe z.B. auch: rTorrent › Wiki › ubuntuusers.de + Multi-Zitat Zitieren
#3 10. Juli 2011 AW: rtorrent installation fragen Warum probierst dus nicht einfach aus und schaust, ob es funktioniert? Die rc-Datei wird standardmäßig von ~/.rtorrent.rc geladen, man kann aber auch jeden beliebigen Pfad über die Parameter angeben: Einfach rtorrent so starten: Code: rtorrent -n -o import=/pfad/zur/rtorrent.rc + Multi-Zitat Zitieren
#4 11. Juli 2011 AW: rtorrent installation fragen Hallo Habe meine config so erstellt Code: # This is an example resource file for rTorrent. Copy to # ~/.rtorrent.rc and enable/modify the options as needed. Remember to # uncomment the options you wish to enable. # Maximum and minimum number of peers to connect to per torrent. #min_peers = 500 #max_peers = 500 # Same as above but for seeding completed torrents (-1 = same as downloading) #min_peers_seed = 10 #max_peers_seed = 50 # Maximum number of simultanious uploads per torrent. #max_uploads = 15 # Global upload and download rate in KiB. "0" for unlimited. #download_rate = 0 #upload_rate = 0 # Default directory to save the downloaded torrents. #directory = /home hanskanns/Datenträger\ H # Default session directory. Make sure you don't run multiple instance # of rtorrent using the same session directory. Perhaps using a # relative path? #session = ./session # Watch a directory for new torrents, and stop those that have been # deleted. #schedule = watch_directory,5,5,load_start=./watch/*.torrent #schedule = untied_directory,5,5,stop_untied= # Close torrents when diskspace is low. #schedule = low_diskspace,5,60,close_low_diskspace=100M # Stop torrents when reaching upload ratio in percent, # when also reaching total upload in bytes, or when # reaching final upload ratio in percent. # example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0 #schedule = ratio,60,60,"stop_on_ratio=200,200M,2000" # The ip address reported to the tracker. #ip = 127.0.0.1 #ip = rakshasa.no # The ip address the listening socket and outgoing connections is # bound to. #bind = 127.0.0.1 #bind = rakshasa.no # Port range to use for listening. #port_range = 6890-6999 # Start opening ports at a random position within the port range. #port_random = no # Check hash for finished torrents. Might be usefull until the bug is # fixed that causes lack of diskspace not to be properly reported. #check_hash = no # Set whetever the client should try to connect to UDP trackers. #use_udp_trackers = yes # Alternative calls to bind and ip that should handle dynamic ip's. #schedule = ip_tick,0,1800,ip=rakshasa #schedule = bind_tick,0,1800,bind=rakshasa # Encryption options, set to none (default) or any combination of the following: # allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext # # The example value allows incoming encrypted connections, starts unencrypted # outgoing connections but retries with encryption if they fail, preferring # plaintext to RC4 encryption after the encrypted handshake # # encryption = allow_incoming,enable_retry,prefer_plaintext # Enable DHT support for trackerless torrents or when all trackers are down. # May be set to "disable" (completely disable DHT), "off" (do not start DHT), # "auto" (start and stop DHT as needed), or "on" (start DHT immediately). # The default is "off". For DHT to work, a session directory must be defined. # # dht = auto # UDP port to use for DHT. # # dht_port = 6881 # Enable peer exchange (for torrents not marked private) # # peer_exchange = yes # # Do not modify the following parameters unless you know what you're doing. # # Hash read-ahead controls how many MB to request the kernel to read # ahead. If the value is too low the disk may not be fully utilized, # while if too high the kernel might not be able to keep the read # pages in memory thus end up trashing. #hash_read_ahead = 10 # Interval between attempts to check the hash, in milliseconds. #hash_interval = 100 # Number of attempts to check the hash while using the mincore status, # before forcing. Overworked systems might need lower values to get a # decent hash checking rate. #hash_max_tries = 10 nur bekomme ich die Meldung connect extension connection refused wenn ich mich über ntorrent verbinden möchte LG + Multi-Zitat Zitieren
#5 11. Juli 2011 AW: rtorrent installation fragen 1. Wieso hast du alles auskommentiert? Du weißt schon, dass "#" als Kommentar gesehen wird 2. Leerzeichen und \ im Pfad sind nicht gut. 3. connection refused => falscher port oder das Programm läuft nicht (was mich bei der Config nicht wundern würde) Wenn ich mir deine anderen Thread so ansehe solltest du dich erstmal mit dem Basics vertraut machen. PS: Ich kann nur transmission als BT Client unter linux empfehlen. + Multi-Zitat Zitieren
#7 11. Juli 2011 AW: rtorrent installation fragen [G]"Invalid start of name"[/G] gibt einiges zurück. Da bereits Zeile 1 betroffen ist, lässt das auf ein falsches Format schließen. Wurde die Datei ggf. unter Windows erstellt/editiert? + Multi-Zitat Zitieren