Double Layer Brenn Problem!

Dieses Thema im Forum "Hardware & Peripherie" wurde erstellt von Eimsbush, 12. Juli 2008 .

Schlagworte:
Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. 12. Juli 2008
    Da mein alter Thread mal wieder geschlossen wurde muss ich halt wieder nen neuen aufmachen!
    Also mir wurde von ein paar RR Usern gesagt, dass mein Brenner DVD+R DL brennen kann! Nun habe ich die .iso Datei eines Spiels hier und er sagt mir immer Fehler beim brennen!
    Egal mit welchem Programm ob Nero oder CloneCD!

    Hilfeeeeeeeeee

    Hab hier Memorex DVD+R DL Rohlinge

    Hier der Nero Log:
    Code:
    
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.86 - HA 1 TA 0 - 7.10.1.0
 Adapter driver: <IDE> HA 1
 Drive buffer : 2048kB
 Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TN1256T NNQ130V >Version: 1.01 - HA 1 TA 1 - 7.10.1.0
 Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0 DMA: On 
DiskPeripheral : SAMSUNG SP2504C atapi Port 1 ID 0 DMA: On 
CdRomPeripheral : TN1256T NNQ130V 1.01 abtafzhw Port 4 ID 0 DMA: Off
CdRomPeripheral : TN1256T NNQ130V 1.01 abtafzhw Port 4 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CdRom0
TN1256T NNQ130V F: CdRom1
TN1256T NNQ130V G: CdRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096492kB)
Free physical memory: 1525MB (1562536kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

12.7.2008
DVD-Image brennen
23:37:29 #1 Text 0 File SCSIPTICommands.cpp, Line 424
 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
 
23:37:29 #2 Text 0 File Burncd.cpp, Line 3508
 Turn on Disc-At-Once, using DVD media
 
23:37:29 #3 Text 0 File DlgWaitCD.cpp, Line 307
 Last possible write address on media: 4173823 (927:30.73, 8151MB)
 Last address to be written: 3825923 (850:12.23, 7472MB)
 
23:37:29 #4 Text 0 File DlgWaitCD.cpp, Line 319
 Write in overburning mode: NO (enabled: CD)
 
23:37:29 #5 Text 0 File DlgWaitCD.cpp, Line 2972
 Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R9 Double Layer
 
23:37:29 #6 Text 0 File DlgWaitCD.cpp, Line 493
 >>> Protocol of DlgWaitCD activities: <<<
 =========================================
 
23:37:29 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
 Setup items (after recorder preparation)
 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
 2 indices, index0 (150) not provided
 original disc pos #0 + 3825924 (3825924) = #3825924/850:12.24
 not relocatable, disc pos for caching/writing not required/not required
 -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3825924 blocks [E: _NEC DVD_RW ND-3500AG]
 --------------------------------------------------------------
 
23:37:29 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
 Prepare [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
 DAO infos:
 ==========
 MCN: ""
 TOCType: 0x00; Session Closed, disc not fixated
 Tracks 1 to 1: Idx 0 Idx 1 Next Trk
 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7835492352, ISRC ""
 DAO layout:
 ===========
 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
 0 | 1 | 1 | 0x41 | 3825924 | 3825924 | 0x00
 3825924 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
 
23:37:29 #9 Text 0 File SCSIPTICommands.cpp, Line 215
 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
 
23:37:29 #10 Text 0 File Burncd.cpp, Line 4294
 Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
 
23:37:29 #11 Phase 24 File dlgbrnst.cpp, Line 1762
 Caching of files started
 
23:37:29 #12 Text 0 File Burncd.cpp, Line 4413
 Cache writing successful.
 
23:37:29 #13 Phase 25 File dlgbrnst.cpp, Line 1762
 Caching of files completed
 
23:37:29 #14 Phase 36 File dlgbrnst.cpp, Line 1762
 Burn process started at 2.4x (3.324 KB/s)
 
23:37:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
 
23:37:29 #16 Text 0 File DVDPlusDualLayer.cpp, Line 670
 L0 Data Zone Capacity not set.
 Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
 
23:37:29 #17 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
 Burning Layer 1
 
23:37:29 #18 Text 0 File DVDPlusDualLayer.cpp, Line 696
 Start writing layer 1 at address 0 (0h)
 Recording mode: unknown Recording Mode
 
23:37:29 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179
 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x24
 Sense Qual: 0x00
 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 
 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 
 Buffer x063d6740: Len x804
 
23:37:29 #20 Text 0 File DVDR.cpp, Line 6783
 Drive: _NEC DVD_RW ND-3500AG
 Book Type request [NEC]: DVD-ROM, write to RAM
 select Book Type setting from RAM
 Changing the Book Type was finished successfully, return code 0
 
23:37:29 #21 CDR -1207 File DVDR.cpp, Line 6477
 Book Type automatically set to: DVD-ROM
 
23:37:29 #22 Text 0 File DVDPlusRW.cpp, Line 675
 Start write address at LBA 0
 DVD high compatibility mode: No
 
23:37:29 #23 Text 0 File ThreadedTransfer.cpp, Line 269
 Pipe memory size 83836800
 
23:37:32 #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179
 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x30
 Sense Qual: 0x05
 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 
 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
 Buffer x07670040: Len x10000
 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 
23:37:32 #25 CDR -1046 File Writer.cpp, Line 303
 Illegal disc
 E: _NEC DVD_RW ND-3500AG
 
23:37:32 #26 SPTI -1046 File SCSIPassThrough.cpp, Line 179
 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x30
 Sense Qual: 0x05
 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 
 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
 
23:37:32 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 179
 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x30
 Sense Qual: 0x05
 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 
 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
 
23:37:32 #28 Text 0 File DVDPlusRW.cpp, Line 853
 Writing extended Lead-out supported: 01 h, return code: -1046
 supported / do not write extended Lead-out / revision 0.4x/1.xx style
 
23:37:32 #29 SPTI -1046 File SCSIPassThrough.cpp, Line 179
 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x30
 Sense Qual: 0x05
 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 
 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 
 
23:37:32 #30 Text 0 File DVDPlusRW.cpp, Line 935
 EndDAO: Last written address 0
 
23:37:32 #31 Text 0 File DVDR.cpp, Line 6783
 Drive: _NEC DVD_RW ND-3500AG
 Book Type request [NEC]: DVD-ROM, write to RAM
 select Book Type setting from RAM
 Changing the Book Type was finished successfully, return code 0
 
23:37:32 #32 CDR -1046 File WriterStatus.cpp, Line 162
 Illegal disc
 E: _NEC DVD_RW ND-3500AG
 
23:37:33 #33 TRANSFER -24 File WriterStatus.cpp, Line 162
 Could not perform end of Disc-at-once
 
23:37:34 #34 Phase 38 File dlgbrnst.cpp, Line 1762
 Burn process failed at 2.4x (3.324 KB/s)
 
23:37:34 #35 Text 0 File SCSIPTICommands.cpp, Line 261
 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
 
23:37:37 #36 Text 0 File Cdrdrv.cpp, Line 11185
 DriveLocker: UnLockVolume completed
 
23:37:37 #37 Text 0 File SCSIPTICommands.cpp, Line 424
 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
 

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  3. 12. Juli 2008
    AW: Double Layer Brenn Problem!

    [NEC 3500AG] Neue Firmware 2.1B erschienen

    Installier dir ma den neuen treiber...
    achja was willste denn brennen?

    XBOX 360 game? Wenn ja, musste die .dvd file und nicht die iso brennen un am besten mit clone cd un 4x

    //EDIT: ok scheint ne alte version zu sein xD

    Dein brenner is müll würd ich sagen... wer kauft au NEC? Billiger müll... LG ftw.. Kosten eh nix mehr
     
  4. 13. Juli 2008
    AW: Double Layer Brenn Problem!


    joa das war damals nen komplett rechner....
    aber wenn ders doch kann warum macht ers dann nich?

    ich test ma den neuen treiber^^ hab noch nie nen treiber fürn laufwerk installiert xD


    EDIT:

    Er brennt die DVD =)
    Trotz 2.4x mit 5500kb/s ???

    Musste das ding Flashen

    klappt =)
     
  5. Video Script

    Videos zum Themenbereich

    * gefundene Videos auf YouTube, anhand der Überschrift.